Working principle and precautions of 3000W laser cutting machine

Working principle of 3000W laser cutting machine The working principle of laser cutting machine is to use high-power laser beam to irradiate the surface of the material to make the material melt, vaporize or burn quickly, so as to achieve the purpose of cutting. Specifically, the working principle of 3000W laser cutting machine includes the following steps:

1. The laser generator generates a high-power laser beam.

2. The laser beam is focused by the optical system to form a high-energy-density laser beam.

3. The high-energy-density laser beam irradiates the surface of the material to make the material melt, vaporize or burn quickly.

4. The cutting head moves along the predetermined trajectory, and the laser beam moves with it to achieve continuous cutting.

5. The slag and gas generated during the cutting process are blown away by auxiliary gas (such as nitrogen, oxygen, etc.) to ensure the cleanliness of the cutting surface.

Operation precautions for 3000W laser cutting machine

1. Operators must undergo professional training and be familiar with the operating procedures and safety requirements of the equipment.

2. Protective glasses, gloves and other protective equipment must be worn during operation to prevent laser radiation and splash damage.

3. Regularly check the performance and accuracy of the equipment to ensure that the equipment is in good working condition.

4. Operate strictly in accordance with the cutting parameters of the material to avoid poor cutting results or equipment damage due to improper parameters.

5. Pay attention to the cutting effect during the cutting process. If any abnormality is found, stop the machine for inspection immediately.

6. After cutting, clean the cutting surface in time to remove residual slag and oxides to ensure the cleanliness and accuracy of the cutting surface.